Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sato, Takumi; Otobe, Haruyoshi; Morishita, Kazuki; Marufuji, Takato; Ishikawa, Takashi; Fujishima, Tadatsune; Nakano, Tomoyuki
JAEA-Technology 2023-016, 41 Pages, 2023/09
JAEA-Technology-2023-016.pdf:2.74MB
This report summarizes the results of the stabilization treatments of post-experiment nuclear materials in Plutonium Fuel Research Facility (PFRF) from August 2018 to March 2021. Based on the management standards for nuclear materials enacted after the contamination accident that occurred at PFRF on June 6, 2017, the post-experiment nuclear materials containing plutonium (Pu): samples mixed with organic substances that cause an increase in internal pressure due to radiolysis (including X-ray diffraction samples mixed with epoxy resin and plutonium powder which caused contamination accidents), carbides and nitrides samples which is reactive in air, and chloride samples which may cause corrosion of storage containers, were selected as targets of the stabilization. The samples containing organic materials, carbides and nitrides were heated in an air flow at 650 
C and 950 C for 2 hours respectively to remove organic materials and convert uranium (U) and Pu into oxides. U and Pu chlorides in LiCl-KCl eutectic melt were reduced and extracted into liquid Cd metal by a reaction with lithium (Li) -cadmium (Cd) alloy and converted to U-Pu-Cd alloy at 500 C or higher. All of the samples were stabilized and stored at PFRF. We hope that the contents of this report will be utilized to consider methods for stabilizing post experiment nuclear materials at other nuclear fuel material usage facilities.
Suyama, Kenya; Ueki, Taro; Gunji, Satoshi; Watanabe, Tomoaki; Araki, Shohei; Fukuda, Kodai
Proceedings of 20th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM22) (Internet), 5 Pages, 2023/06
Since the 1990s, the importance of the handbook has changed significantly, as the computational power has improved and continuous energy Monte Carlo codes have become widely used, which enables highly accurate criticality calculations, when necessary, irrespective of the complexity of the system. Because the value of performing a large number of calculations in advance and summarizing the data has decreased, since the second edition was published publicly in 1999, there has been no revision of criticality safety handbooks in Japan for nearly a quarter of a century. In Japan, where the Fukushima Daiichi Nuclear Power Plant accident occurred in 2011, it became necessary to deal with criticality safety issues in the transport and storage of the fuel debris which contains complex constituent elements, and the summary the criticality safety management for such material is an urgent issue. In the area of burnup credit, the transport and storage of fuel assemblies with low achieved burnups due to the consequences of accidents might be the problem. In addition, nuclear data, which is the input for the continuous energy Monte Carlo code, has been improved several times, now JENDL-5 is available from the end of 2021, and its incorporation becomes a need in the field. This report provides an overview of the latest criticality safety research in Japan and the planned revision of the Criticality Safety Handbook, which could be applied to the transport and storage sectors.
Kobayashi, Keita; Nakamura, Hiroki; Itakura, Mitsuhiro; Machida, Masahiko; Okumura, Masahiko
Materia, 62(3), p.175 - 181, 2023/03
no abstracts in English
Morishita, Kazuki; Sato, Takumi; Onishi, Takashi; Seki, Takayuki*; Sekine, Shinichi*; Okitsu, Yuichi*
JAEA-Technology 2021-024, 27 Pages, 2021/10
JAEA-Technology-2021-024.pdf:2.41MB
In the case of Plutonium (Pu)-bearing organic materials, organic materials are decomposed by alpha rays emitted mainly from Pu to generate hydrogen gas and other substances. Therefore, to safely store Pu-bearing organic materials for an extended period of time, organic materials must be eliminated. In addition, carbide and nitride fuels must be converted into oxides for safe storage in order to prevent the exothermal reaction of these fuels with oxygen/moisture in air. A survey of the literature on the stabilization treatment of Pu-bearing organic materials confirmed that organic materials can be decomposed and removed by heating at 950 C (1223.15 K) or greater in air. Furthermore, based on the calculated thermodynamic parameters of oxidation reaction of carbide and nitride fuels in air, it was estimated that these fuels would be oxidized in air at 950 C because the equilibrium oxygen partial pressure in the oxidation reaction at 950 C was lower than 2.1
10
Pa (oxygen partial pressure in air). Therefore, it was decided to stabilize Pu-bearing organic materials by heating at 950 C in air to remove the organic materials and oxidize the carbide and nitride fuels. As a mock-up test to remove the organic materials, thin sheets of epoxy resin were heated in air. The changes in appearance and weight before and after heating in air showed that organic materials can be removed. After the mock-up test, Pu-bearing organic materials were also stabilized by heating in the similar condition.
Sakamoto, Naoki; Fujishima, Tadatsune; Mizukoshi, Yasutaka
Hozengaku, 19(2), p.125 - 126, 2020/07
The five post-irradiation examination facilities in JAEA's Oarai research and development institute have been operated for over 40 years in order to investigate the irradiation performance of fast reactor fuel materials. The equipment associated with these facilities has been managed to maintain secure from the problems occurred in the process of aging. Therefore, we established a safety assessment method for aging facilities in 2002, and we have been conducting maintenance management of facilities since then. In this study, improvement plans of the safety assessment method are considered in order to solve the issues detected as a result of analysis of past maintenance information.
Ozu, Akira; Maeda, Makoto; Komeda, Masao; Toh, Yosuke
Proceedings of 2018 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC 2018) (Internet), 4 Pages, 2019/10
Cause Investigation Team for the PFRF Contamination Incident
JAEA-Review 2017-038, 83 Pages, 2018/03
JAEA-Review-2017-038.pdf:11.37MB
The contaminated accident occurred at Plutonium Fuel Research Facility on June, 2017. The PVC bag packaging in a fuel storage container burst when a worker opened the lid, and a part of contents (uranium and plutonium) was spattered over the room. In order to clarify the cause of the burst, the Cause Unfolding Team collected information concerning characteristics of the contents from any past records and interview. And then we observed and analyzed the contents in a glove box. We also performed experiments on radiolysis of organic materials, degradation of PVC bag by 
radiation, and PVC bag burst. Based on fault tree analysis, finally we concluded that the main gas generation source was alpha radiolysis of the epoxy resin mixed with the fuel powder. We hope that the calculation procedures for the gas generation and the inner pressure transition described in this report can be useful reference for the management of fuel storage in other facilities.
Nagatani, Taketeru; Komeda, Masao; Shiba, Tomooki; Nauchi, Yasushi*; Maeda, Makoto; Sagara, Hiroshi*; Kosuge, Yoshihiro*; Kureta, Masatoshi; Tomikawa, Hirofumi; Okumura, Keisuke; et al.
Energy Procedia, 131, p.258 - 263, 2017/12
Times Cited Count：10 Percentile：98.3(Energy & Fuels)Nagatani, Taketeru; Komeda, Masao; Shiba, Tomooki; Maeda, Makoto; Nauchi, Yasushi*; Sagara, Hiroshi*; Kosuge, Yoshihiro*; Kureta, Masatoshi; Tomikawa, Hirofumi; Okumura, Keisuke; et al.
Proceedings of INMM 57th Annual Meeting (Internet), 10 Pages, 2016/07
Yamashita, Toshiyuki
Isotope News, (583), p.20 - 24, 2002/11
no abstracts in English
; ;
JAERI-M 6499, 33 Pages, 1976/03
no abstracts in English
Shimazaki, Yosuke; Sawahata, Hiroaki; Takada, Shoji; Fujimoto, Nozomu
no journal, ,
no abstracts in English
